Powertec® i250 Standard ir kompakts invertors MIG/MAG un MMA metināšanai. To var izmantot MIG un STICK tērauda, nerūsējošā tērauda un alumīnija metināšanai, kā arī MIG lodēšanai. Vienkārša regulēšana un lietošana. Optimāla stieples novietošana, 4 piedziņas veltņi, logs kontrolei. Piemērots intensīvai rūpnieciskai lietošanai. Izstrādāts un pārbaudīts smagos darba apstākļos (TRUE HD). Ieejas spriegums - 400V (+/-15%)/3f/50Hz. Strāvas diapazons - 10-250A. Darba cikls - 195A @100%; 250A @60%. Stieples diapazons - 0,6-1,6mm. Izmēri (G x P x A) - 935 x 560 x 878 mm. Svars – 69 kg Komplektā iekļauts strāvas vads (5 m), zemējuma vads (3 m), gāzes šļūtene (2 m), 1,0-1,2mm piedziņas veltņi. 3 gadu garantija.

The Quickmig® 300 compact machine is a professional inverter for everyday use that ensures optimal MIG/MAG (GMAW/FCAW) and MMA (SMAW) welding results. It is easy to use and set up and allows for welding of light structures or repair of vehicles and light agricultural machinery. The machine has large LED screens and an easy-to-set-up user interface. The Quickmig 300 is equipped with a EURO socket for connecting a MIG torch and a wheeled cart with space on the back for installing a gas cylinder. Functions: MIG/MAG (GMAW/FCAW) and SMAW processes. Manual and synergic mode. Standard equipment includes 24 synergic programs for welding steel, stainless steel, flux-cored wire and aluminum. Quick process selection and parameter setting. Perfect wire feed with 4-roll wire drive. Easy access for wire spool installation. Big wheels and low gas cylinder inlet. Large and bright LED screen. Technical specifications: Supply voltage - 400V (+/- 10%) / 3f / 50Hz. Current regulation - 50-300A. Duty cycle - 175A @ 100%; 300A @ 35%. Wire range - 0.6-1.2 mm. Dimensions (L x W x H) - 760 x 395 x 830 mm. Weight - 50 kg. The set includes - power cable (3m), grounding cable (3m), gas hose (2m), 0.8-1.0mm drive rollers, user manual (USB). 2-year warranty.

Plasma cutting - anywhere, anytime. The Tomahawk® 30K plasma cutter is ready for fast and accurate cutting - it works both with a built-in compressor and when connected to a compressed air line. Forget the angle grinder, just pick up the torch and cut in seconds. Maximum cutting power 16mm (recommended up to 12mm). Functions: • Ultimate portability – the internal air compressor enables operation in environments where external compressed air is not available. • Continuous output control – suitable arc for different material thicknesses. • "Touch Start" starting system - reliable plasma arc starting without high frequency. • Rapid Arc Restrike - rapid cutting of gaps. • Pressure regulator on the front panel - makes it easy to set the air flow rate without starting the plasma arc. • Dip and grid modes (adjustable grid time) • New design of electrodes and nozzles save money in the long run. • Additional safety – our consumables installation system detects correct installation of consumables and torch. • Select a suitable generator to power the Tomahawk® in remote locations. Technical specifications: Supply voltage 230V, 1-phase, Current strength 15-30A. Protection (slow) 16A. 20A when starting the arc. Duty cycle 30A@60%, 25A@100%. Weight 18.5 kg. Dimensions 385x215x480mm. Air requirement 125l/min +/- 10% @ 5.0-6.0bar. The set includes: Built-in air compressor, power cable, 4m manual torch LC30, ground clamp and cable, consumable parts for the torch, built-in moisture separator. 2-year warranty.

The Tomahawk® 45 plasma cutter is portable enough to take with you to any job site. Connect the compressed air, grab the torch and start cutting right away. Maximum cutting power 20mm (recommended up to 16mm). Functions: • TFT 2.8” screen – for a simpler and more user-friendly user interface • Continuous output control – suitable arc for different material thicknesses. • "Touch Start" starting system - reliable plasma arc starting without high frequency. • Rapid Arc Restrike - rapid cutting of gaps. • Pressure regulator on the front panel - makes it easy to set the air flow rate without starting the plasma arc. • Gouging and grid modes (adjustable grid time) • New design of electrodes and nozzles save money in the long run. • Additional safety – our consumables installation system detects correct installation of consumables and torch. • Lightweight and portable – easily carried by one person. • Motor Drive Compatible – The Tomahawk® 45 Plasma Cutter is portable enough to take with you to any job site. Connect the compressed air, grab the torch and start cutting right away. • Select a suitable generator to power the Tomahawk® in remote locations. Technical specifications: Supply voltage 230V, 1-phase, Current strength 15-45A, Duty cycle 45A@45%, 30A@100%. Weight 11.1 kg. Dimensions 385x215x480mm. Air requirement 200l/min +/- 10% @ 5.0-6.0bar. The set includes: Input cable, 6m manual torch LC45, earthing clamp and cable, consumable parts of the torch, built-in water separator. 2-year warranty.